Types and Grades of 2H Hex Heavy Hex Nuts

Types and Grades of 2H Hex Heavy Hex Nuts

Update:25-07-2022
Summary:

ASTM A194 2H Heavy Hex Nuts are made from 1045 steel, w […]

ASTM A194 2H Heavy Hex Nuts are made from 1045 steel, which meets the requirements of ASTM A194 Grade 2H. They are hot-dip galvanized per ASTM A153 and F2329) and over-tapped per ASTM A563. Typical hardness levels for these nuts are 24 to 35. For larger diameters, they range from HRB 95 to HRC 35. Proof load strength is 175,000 psi.

High quality domestic 2H hex nuts are available from Honolulu, Hawaii. They are available in sealed and full bags. They are also available in lot controlled quantities. A quick search on the web will allow you to identify the exact nut you need, while also ensuring that you're getting a quality product that will meet your needs. Moreover, a Material Test Report will tell you exactly what type of nut you'll receive, whether it's 2H or 2HM.

ASTM A194 Grade 8M heavy hex nuts are made of AISI 316 grade stainless steel. They're rated for high-temperature and pressure environments. They're also available with a grade marking of 8M. They're suitable for a variety of structural applications, including high-speed transmission equipment and machinery. These nuts are available in hot-dipped galvanized and in custom sizes.

ASTM A194 Grade 2H Heavy Hex Nuts are designed for high pressure applications and are heat-treated to improve strength and corrosion resistance. Typically, they're available in sizes ranging from 5mm to 3 inches. For more information, contact a leading manufacturer or supplier of Heavy Hex Nuts. The company offers various types and grades of 2H heavy nuts. There are many applications for 2H hex nuts and we can help you decide which is right for you.

Heavy Hex Nuts are slightly thicker and larger than standard hex nuts. They're used in high-strength applications that require large-diameter bolts. To ensure the nut's compatibility, check the nut compatibility chart. Hot-dip galvanizing adds 2.2 to 5 mils of thickness to the threaded portion of the fastener. Because of this, these heavy hex nuts are tapped slightly oversize.

0
Views: 269